Re: First meeting with NAMD

From: James Starlight (jmsstarlight_at_gmail.com)
Date: Tue Jun 04 2013 - 03:13:10 CDT

Hi Norman!

Thanks for suggestions again. Could you also help with the psfgen (Above
I've described my problem)

Here script that I used

package require psfgen
resetpsf
topology top_crq_final.inp

topology top_all36_prot.rtf
pdbalias residue HIS HSE
segment A {
pdb prot_charm1.pdb
first Nter
last NONE
}
coordpdb prot_charm1.pdb A

segment B {
first NONE
last Cter
pdb prot_charm2.pdb

}
coordpdb prot_charm2.pdb B

segment C {
pdb crq.pdb
first NONE
last NONE
}
coordpdb crq.pdb C

guesscoord
patch link A:64 C:65
patch link C:65 B:69

writepsf dhp-output.psf
writepdb dhp-output.pdb

Here link correspond to the imaginary connection which I've found in the
charm36 params

PRES LINK 0.00 ! linkage for IMAGES or for joining segments
                       ! 1 refers to previous (N terminal)
                       ! 2 refers to next (C terminal)
                       ! use in a patch statement
                       ! follow with AUTOgenerate ANGLes DIHEdrals command
BOND 1C 2N
!the need for the explicit specification of angles and dihedrals in
!patches linking images has not been tested
!ANGLE 1C 2N 2CA 1CA 1C 2N
!ANGLE 1O 1C 2N 1C 2N 2HN
!DIHE 1C 2N 2CA 2C 1C 2N 2CA 2HA 1C 2N 2CA 2CB
!DIHE 1HA 1CA 1C 2N 1N 1CA 1C 2N 1CB 1CA 1C 2N
!DIHE 1CA 1C 2N 2HN 1CA 1C 2N 2CA
!DIHE 1O 1C 2N 2HN 1O 1C 2N 2CA
IMPR 2N 1C 2CA 2HN 1C 1CA 2N 1O
IC 1N 1CA 1C 2N 0.0000 0.0000 180.0000 0.0000 0.0000
IC 2N 1CA *1C 1O 0.0000 0.0000 180.0000 0.0000 0.0000
IC 1CA 1C 2N 2CA 0.0000 0.0000 180.0000 0.0000 0.0000
IC 1C 2N 2CA 2C 0.0000 0.0000 180.0000 0.0000 0.0000
IC 1C 2CA *2N 2HN 0.0000 0.0000 180.0000 0.0000 0.0000

This produces reasonable geometry of chromophore embedded into the rest of
the GFP barell but As I understood from the description I should provide
some extra parameters for dihedrals and impropers for that connector
regions. Assuming that chromophore is the part of the rest of backbone and
standart parameters could be used from the backbone aminoacids how I could
specifi it for that case ?

Thanks for help,

James

2013/6/4 James Starlight <jmsstarlight_at_gmail.com>

> Hi Norman!
>
> Thanks for suggestions again. Could you also help with the psfgen (Above
> I've described my problem)
>
> Here script that I used
>
> package require psfgen
> resetpsf
> topology top_crq_final.inp
>
> topology top_all36_prot.rtf
> pdbalias residue HIS HSE
> segment A {
> pdb prot_charm1.pdb
> first Nter
> last NONE
> }
> coordpdb prot_charm1.pdb A
>
> segment B {
> first NONE
> last Cter
> pdb prot_charm2.pdb
>
> }
> coordpdb prot_charm2.pdb B
>
>
> segment C {
> pdb crq.pdb
> first NONE
> last NONE
> }
> coordpdb crq.pdb C
>
> guesscoord
> patch link A:64 C:65
> patch link C:65 B:69
>
> writepsf dhp-output.psf
> writepdb dhp-output.pdb
>
> Here link correspond to the imaginary connection which I've found in the
> charm36 params
>
> PRES LINK 0.00 ! linkage for IMAGES or for joining segments
> ! 1 refers to previous (N terminal)
> ! 2 refers to next (C terminal)
> ! use in a patch statement
> ! follow with AUTOgenerate ANGLes DIHEdrals command
> BOND 1C 2N
> !the need for the explicit specification of angles and dihedrals in
> !patches linking images has not been tested
> !ANGLE 1C 2N 2CA 1CA 1C 2N
> !ANGLE 1O 1C 2N 1C 2N 2HN
> !DIHE 1C 2N 2CA 2C 1C 2N 2CA 2HA 1C 2N 2CA 2CB
> !DIHE 1HA 1CA 1C 2N 1N 1CA 1C 2N 1CB 1CA 1C 2N
> !DIHE 1CA 1C 2N 2HN 1CA 1C 2N 2CA
> !DIHE 1O 1C 2N 2HN 1O 1C 2N 2CA
> IMPR 2N 1C 2CA 2HN 1C 1CA 2N 1O
> IC 1N 1CA 1C 2N 0.0000 0.0000 180.0000 0.0000 0.0000
> IC 2N 1CA *1C 1O 0.0000 0.0000 180.0000 0.0000 0.0000
> IC 1CA 1C 2N 2CA 0.0000 0.0000 180.0000 0.0000 0.0000
> IC 1C 2N 2CA 2C 0.0000 0.0000 180.0000 0.0000 0.0000
> IC 1C 2CA *2N 2HN 0.0000 0.0000 180.0000 0.0000 0.0000
>
>
> This produces reasonable geometry of chromophore embedded into the rest of
> the GFP barell but As I understood from the description I should provide
> some extra parameters for dihedrals and impropers for that connector
> regions. Assuming that chromophore is the part of the rest of backbone and
> standart parameters could be used from the backbone aminoacids how I could
> specifi it for that case ?
>
>
> Thanks for help,
>
> James
>
>
> 2013/6/4 Norman Geist <norman.geist_at_uni-greifswald.de>
>
>> *Von:* owner-namd-l_at_ks.uiuc.edu [mailto:owner-namd-l_at_ks.uiuc.edu] *Im
>> Auftrag von *James Starlight
>> *Gesendet:* Montag, 3. Juni 2013 16:09
>> *An:* namd-l_at_ks.uiuc.edu
>> *Betreff:* namd-l: First meeting with NAMD****
>>
>> ** **
>>
>> Dear NAMD users!
>>
>> Hi james,****
>>
>> ** **
>>
>>
>> Recently I've tried to launch my first simulation on NAMD :) (previously
>> I've used Gromacs ).
>> My questions:
>>
>>
>> 1) Typical gromacs simulation consist of energy minimization +
>> equilibration in NPT ensemble (with position restraints applied on each
>> atoms of protein) + production run.
>>
>> As I understood minimization should explicitly defined in the conf file
>>
>> # Minimization
>> minimize 100
>> reinitvels $temperature
>>
>> run 5000000
>>
>> but what about equilibration stage ?
>> How I can perform short simulation with the applied porses prior to the
>> production run?
>>
>> We usually have the following simulation protocol:****
>>
>> **1. **Minimization for some thousand steps, depending on system
>> size (check if TOTAL energy converges)****
>>
>> **2. **Heating up using Langevin thermostat (there are multiple
>> methods and thermostats available)****
>>
>> **3. **Constant Pressure (remove vacuum bubbles from solvent using
>> piston barostat, also other choices available)****
>>
>> **4. **Heat again as pressure could have changed anything****
>>
>> **5. **Free simulation <- production run****
>>
>> Each of these steps is represented by a own namd script. Additionally,
>> each step uses the final coordinates and velocities from the step before,
>> except minimization which start from the initial structure of course.****
>>
>>
>> 2) How I can monitor total performance of the GPU utilized in the
>> simulation assuming that I use CUDA.****
>>
>> ** **
>>
>> Depending on what kind of GPU you got, you can try nvidia-smi to check
>> for the utilization (I guess only for Tesla). But as others already said,
>> you should use the CPU:GPU ratio and configuration, that comes with the
>> smallest time/step. Additionally, for most system sizes I got a nice almost
>> two-fold speedup by using “twoawayx yes” in my namd script, you should try
>> the difference. To be sure to get the best performance, it’s worth it to do
>> some benchmarks.****
>>
>>
>>
>> 3) I have parameters ( prm and inp files) for some non-standard residue (
>> GFP chromophore). for this protein I'd like to make model (including
>> protein covalently bonded to the chromophore and solvent) and perform
>> simulation.
>> Could you provide me with the example or short tutorial for such task?
>>
>> See VMD and psfgen. Additionally search for the NAMD Tutorial on the net,
>> which is a really nice for starting for both NAMD and VMD.****
>>
>>
>> Thanks for help,
>>
>>
>> James****
>>
>
>

This archive was generated by hypermail 2.1.6 : Wed Dec 31 2014 - 23:21:15 CST