**From:** James Starlight (*jmsstarlight_at_gmail.com*)

**Date:** Wed Sep 11 2013 - 12:20:59 CDT

**Next message:**Sunhwan Jo: "Re: charm-gui membrane builder"**Previous message:**Francesco Pietra: "Does stray PME charges with T-REMD mean insufficient resources and can explicit water abandoned for implicit GB?"**In reply to:**James Starlight: "Re: charm-gui membrane builder"**Next in thread:**Sunhwan Jo: "Re: charm-gui membrane builder"**Reply:**Sunhwan Jo: "Re: charm-gui membrane builder"**Messages sorted by:**[ date ] [ thread ] [ subject ] [ author ] [ attachment ]

My problem have been solved via adding below term to the conf file

useConstantArea yes ;

instead of

useConstantRatio yes ; # which was presented on the default charm-gui conf

file.

I'm not sure if this is possible to make such changes to the NON

equilibrated bilayers but this prevent crash with PBC error

also could my problem be solved providing softer coupling to the pressure

bath increasing below two params ?

langevinPistonPeriod 200.0

langevinPistonDecay 50.0

Finally does anybody knows some pre-equlibrated bilayers with suitable namd

inputs ?

James

2013/9/10 James Starlight <jmsstarlight_at_gmail.com>

*> Thanks again for suggestions!
*

*>
*

*> That problem has been solved performing minimization as the separate step
*

*> on the CPU-only.
*

*>
*

*> The new problem have been arrisen when I add the barostat to my system on
*

*> the 6.3 step
*

*>
*

*>
*

*> # constant pressure
*

*> langevinPiston on
*

*> langevinPistonTarget 1.01325
*

*> langevinPistonPeriod 200.0
*

*> langevinPistonDecay 50.0
*

*> langevinPistonTemp $temp
*

*>
*

*> from the beginning of this step the bi-layer have been increased in XY
*

*> plane rapidly and shrunk in the Z plane ( this simulation have been
*

*> performed with GPU). How this issue could be solved ?
*

*>
*

*>
*

*> 2013/9/9 James Starlight <jmsstarlight_at_gmail.com>
*

*>
*

*>> I've just tried to make such minimization + equilibration in the
*

*>> different steps
*

*>> with that system
*

*>> http://www.charmm-gui.org/?doc=input/membrane_only&time=1378378701
*

*>>
*

*>> but unfortunately after minimization my system have been crashed during
*

*>> beginning of the production run (
*

*>>
*

*>> James
*

*>>
*

*>>
*

*>> 2013/9/9 Cesar Millan <pachequin_at_gmail.com>
*

*>>
*

*>>> Hi,
*

*>>>
*

*>>> I really don't know, I just made that changes and it worked.
*

*>>>
*

*>>> Best regards.
*

*>>>
*

*>>> Cesar
*

*>>>
*

*>>>
*

*>>> ############################
*

*>>> César Millán Pacheco
*

*>>> Facultad de Ciencias
*

*>>> Universidad Autonoma del Estado de Morelos
*

*>>> Tel: 777 3297020
*

*>>> Fax: 777 3207040
*

*>>> email: cmp_at_uaem.mx
*

*>>> pachequin_at_gmail.com
*

*>>>
*

*>>>
*

*>>>
*

*>>> On Sun, Sep 8, 2013 at 11:52 PM, James Starlight <jmsstarlight_at_gmail.com
*

*>>> > wrote:
*

*>>>
*

*>>>> Cesar, thank you for suggestion!
*

*>>>>
*

*>>>> Should I make any extra changes to the minim.inp file (made based on
*

*>>>> the step6.1 template )?
*

*>>>>
*

*>>>> Is it possible to turned-off GPU-regime during some equilibration step
*

*>>>> ? I'd like to check if the possible soursse of such errors in GPU.
*

*>>>>
*

*>>>> James
*

*>>>>
*

*>>>>
*

*>>>> 2013/9/9 Cesar Millan <pachequin_at_gmail.com>
*

*>>>>
*

*>>>>> I dont turn off the gpu regime. I just create 3 new files using
*

*>>>>> charmm-gui input files as templates. On step6.1.equ...inp, I separate it on
*

*>>>>> two files step6.1.equilibration_min.inp and step6.1.equilibration_din.inp.
*

*>>>>> After that on step6.1...min.inp i delete the "run ...." line and on
*

*>>>>> step6.1...din.inp I delete those lines that implies a minimization process.
*

*>>>>> You have to check that the names of step6.1....min.inp are the input names
*

*>>>>> for step6.1....din.inp.
*

*>>>>>
*

*>>>>> Hope this helps.
*

*>>>>>
*

*>>>>> Cesar
*

*>>>>>
*

*>>>>>
*

*>>>>>
*

*>>>>> ############################
*

*>>>>> César Millán Pacheco
*

*>>>>> Facultad de Ciencias
*

*>>>>> Universidad Autonoma del Estado de Morelos
*

*>>>>> Tel: 777 3297020
*

*>>>>> Fax: 777 3207040
*

*>>>>> email: cmp_at_uaem.mx
*

*>>>>> pachequin_at_gmail.com
*

*>>>>>
*

*>>>>>
*

*>>>>>
*

*>>>>> On Sun, Sep 8, 2013 at 12:04 PM, James Starlight <
*

*>>>>> jmsstarlight_at_gmail.com> wrote:
*

*>>>>>
*

*>>>>>> Cesar,
*

*>>>>>>
*

*>>>>>> could you tell me how should I run my simulation in gpu turned off
*

*>>>>>> regime ? I've not found this in man (
*

*>>>>>>
*

*>>>>>> James
*

*>>>>>>
*

*>>>>>>
*

*>>>>>> 2013/9/8 Cesar Millan <pachequin_at_gmail.com>
*

*>>>>>>
*

*>>>>>>> Hi, I've done this kind of systems before on GPUs. You have to
*

*>>>>>>> separate minimization and dynamics.
*

*>>>>>>> Run the minimization process with the NAMD CPU version and the
*

*>>>>>>> dynamics with the NAMD GPU version.
*

*>>>>>>>
*

*>>>>>>> best regards.
*

*>>>>>>>
*

*>>>>>>> Cesar
*

*>>>>>>>
*

*>>>>>>>
*

*>>>>>>>
*

*>>>>>>> ############################
*

*>>>>>>> César Millán Pacheco
*

*>>>>>>> Facultad de Ciencias
*

*>>>>>>> Universidad Autonoma del Estado de Morelos
*

*>>>>>>> Tel: 777 3297020
*

*>>>>>>> Fax: 777 3207040
*

*>>>>>>> email: cmp_at_uaem.mx
*

*>>>>>>> pachequin_at_gmail.com
*

*>>>>>>>
*

*>>>>>>>
*

*>>>>>>>
*

*>>>>>>> On Sun, Sep 8, 2013 at 11:44 AM, James Starlight <
*

*>>>>>>> jmsstarlight_at_gmail.com> wrote:
*

*>>>>>>>
*

*>>>>>>>> It seems that problem was not in cholesterol
*

*>>>>>>>>
*

*>>>>>>>> E.g I've tried to equilibration this simplest system
*

*>>>>>>>>
*

*>>>>>>>> http://www.charmm-gui.org/?doc=input/membrane_only&time=1378628752
*

*>>>>>>>>
*

*>>>>>>>> and after long minimization I've obtained error
*

*>>>>>>>>
*

*>>>>>>>> WRITING EXTENDED SYSTEM TO RESTART FILE AT STEP 30000
*

*>>>>>>>> WRITING COORDINATES TO DCD FILE AT STEP 30000
*

*>>>>>>>> WRITING COORDINATES TO RESTART FILE AT STEP 30000
*

*>>>>>>>> FINISHED WRITING RESTART COORDINATES
*

*>>>>>>>> WRITING VELOCITIES TO RESTART FILE AT STEP 30000
*

*>>>>>>>> FINISHED WRITING RESTART VELOCITIES
*

*>>>>>>>> TCL: Setting parameter numsteps to 90000000
*

*>>>>>>>>
*

*>>>>>>>> TCL: Original numsteps 90000000 will be ignored.
*

*>>>>>>>> TCL: Running for 25000 steps
*

*>>>>>>>> REASSIGNING VELOCITIES AT STEP 30000 TO 310 KELVIN.
*

*>>>>>>>> colvars: Writing the state file
*

*>>>>>>>> "step6.1_equilibration.restart.colvars.state".
*

*>>>>>>>> colvars: Synchronizing (emptying the buffer of) trajectory file
*

*>>>>>>>> "step6.1_equilibration.colvars.traj".
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 14039!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 8959!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 66!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 15321!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 13670!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 9380!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 5019!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 11279!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 7260!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 18406!
*

*>>>>>>>>
*

*>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>> ERROR: Exiting prematurely; see error messages above.
*

*>>>>>>>> ====================================================
*

*>>>>>>>>
*

*>>>>>>>>
*

*>>>>>>>> I'm not sure if it possible to run simulation purely with the CPU
*

*>>>>>>>> (turned off GPU) on my machine
*

*>>>>>>>> Typically I run simulation with GPU by means of
*

*>>>>>>>> namd2 +idlepoll +p4 +devices 0 ./step6.2_equilibration.inp
*

*>>>>>>>>
*

*>>>>>>>> May be some extra parameters should be provided in the conf file
*

*>>>>>>>> when I simulate with GPU? E.g I suppose that some addition should be added
*

*>>>>>>>> to the PBC as well as PME options.
*

*>>>>>>>>
*

*>>>>>>>> James
*

*>>>>>>>>
*

*>>>>>>>>
*

*>>>>>>>> 2013/9/8 Sunhwan Jo <sunhwan_at_uchicago.edu>
*

*>>>>>>>>
*

*>>>>>>>>> James,
*

*>>>>>>>>>
*

*>>>>>>>>> Can you try with CPU version of NAMD?
*

*>>>>>>>>>
*

*>>>>>>>>> Sunhwan
*

*>>>>>>>>>
*

*>>>>>>>>> Sent from my iPhone
*

*>>>>>>>>>
*

*>>>>>>>>> On Sep 8, 2013, at 12:04 AM, "James Starlight" <
*

*>>>>>>>>> jmsstarlight_at_gmail.com> wrote:
*

*>>>>>>>>>
*

*>>>>>>>>> Emilia,
*

*>>>>>>>>>
*

*>>>>>>>>> I've already tried to increase minimization step number but
*

*>>>>>>>>> result was the same.
*

*>>>>>>>>>
*

*>>>>>>>>> Briefly I've just tried to minimize my system (for example the
*

*>>>>>>>>> system which I've shown or also I have the same system with reduced water
*

*>>>>>>>>> layers) during equilibration step6.1 with namd 2.9(gpu-simulation regime).
*

*>>>>>>>>> By the way what other options of the minimization can I change besides step
*

*>>>>>>>>> number as well as integrator timestep (e.g can I vary gradient degree or
*

*>>>>>>>>> minimization algorithm )?
*

*>>>>>>>>>
*

*>>>>>>>>> James
*

*>>>>>>>>>
*

*>>>>>>>>>
*

*>>>>>>>>> 2013/9/7 Emilia Wu <emilia.l.wu_at_gmail.com>
*

*>>>>>>>>>
*

*>>>>>>>>>> You can minimize more steps before dynamics starts. The default
*

*>>>>>>>>>> number in the input might be too small for your big system.
*

*>>>>>>>>>>
*

*>>>>>>>>>> Emilia
*

*>>>>>>>>>>
*

*>>>>>>>>>> On Sep 7, 2013, at 4:04 AM, James Starlight wrote:
*

*>>>>>>>>>>
*

*>>>>>>>>>> Emillia,
*

*>>>>>>>>>>
*

*>>>>>>>>>> I've tried to launch simulation from the files produced by
*

*>>>>>>>>>> charm-gui but simulation have crashed on the beginning of the first
*

*>>>>>>>>>> equilibration step after long minimization with the error
*

*>>>>>>>>>>
*

*>>>>>>>>>> TCL: Original numsteps 90000000 will be ignored.
*

*>>>>>>>>>> TCL: Running for 25000 steps
*

*>>>>>>>>>> REASSIGNING VELOCITIES AT STEP 0 TO 303.15 KELVIN.
*

*>>>>>>>>>> Pe 2 has 36 local and 36 remote patches and 972 local and 972
*

*>>>>>>>>>> remote computes.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4962!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 5678!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 2288!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 5370!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3089!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3759!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 20746!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 14993!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 2681!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4697!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1669!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1634!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4731!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 2191!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 6835!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 942!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 11615!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3217!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 7862!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1920!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 723!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1030!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 2733!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 262!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 336!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1259!
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1201!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3491!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 5287!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 145!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 6863!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 7462!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1811!
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 397!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 854!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1453!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1792!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 8914!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 10618!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3135!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 7368!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 13152!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 6171!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 8533!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 21871!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 9658!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1715!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 2824!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 12533!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 8990!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 751!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4164!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 6875!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 175!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1156!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 455!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 9569!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 1535!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 435!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 7012!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 5552!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3525!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3266!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 256!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 6265!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 3155!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 2209!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 24!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4392!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4495!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 4751!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Constraint failure in RATTLE algorithm for atom 552!
*

*>>>>>>>>>> ERROR: Constraint failure; simulation has become unstable.
*

*>>>>>>>>>> ERROR: Exiting prematurely; see error messages above.
*

*>>>>>>>>>>
*

*>>>>>>>>>>
*

*>>>>>>>>>> It looks like my system have not been equilibrated properly and
*

*>>>>>>>>>> I have the same eror only in case of big systems. How I could fix it?
*

*>>>>>>>>>>
*

*>>>>>>>>>> James
*

*>>>>>>>>>>
*

*>>>>>>>>>>
*

*>>>>>>>>>>
*

*>>>>>>>>>> 2013/9/7 Sunhwan Jo <sunhwan_at_uchicago.edu>
*

*>>>>>>>>>>
*

*>>>>>>>>>>> James,
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> My labmate has downloaded your files and ran step6.1 input
*

*>>>>>>>>>>> using NAMD_2.9_Linux-x86_64-TCP/namd2. We didn't find any problems with the
*

*>>>>>>>>>>> minimization and it was working well in our test.
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> Sunhwan
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> On Sep 6, 2013, at 11:24 AM, James Starlight <
*

*>>>>>>>>>>> jmsstarlight_at_gmail.com> wrote:
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> Dear all !
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> Thanks for suggestions!
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> I've mentioned in the adjacent topic the problem of
*

*>>>>>>>>>>> minimization for the system consisted of many lipids + water (produced by
*

*>>>>>>>>>>> charm_gui).
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> Briefly when I try to minimize clashes in big systems ( many
*

*>>>>>>>>>>> lipids + solvent) the minimization didt work ( its looks like all atoms
*

*>>>>>>>>>>> were frozen during whole minimization trajectory so the clashes didnt
*

*>>>>>>>>>>> resolved ).
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> When I try to minimize the same system without water (only
*

*>>>>>>>>>>> lipids)- there were no problem at all (the lipid tales constantly moves
*

*>>>>>>>>>>> during minimization resolving clashes between them) .
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> To fix this problem I've tried to add FIX ATOMS to all water
*

*>>>>>>>>>>> according to tutorial but the problem have not been solved in case of big
*

*>>>>>>>>>>> systems. How I should minimize it ?
*

*>>>>>>>>>>>
*

*>>>>>>>>>>>
*

*>>>>>>>>>>> 2013/9/6 Sunhwan Jo <sunhwan_at_uchicago.edu>
*

*>>>>>>>>>>>
*

*>>>>>>>>>>>> James
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> CHARMM-GUI generates step_assembly.xplor.psf, which can be
*

*>>>>>>>>>>>> used in NAMD. Perhaps this file is not displayed on webpage. You can
*

*>>>>>>>>>>>> download every file generated by GUI by using "download .tgz" link on the
*

*>>>>>>>>>>>> upper right corner of the webpage.
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> Sunhwan
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> Sent from my iPhone
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> On Sep 6, 2013, at 6:35 AM, "James Starlight" <
*

*>>>>>>>>>>>> jmsstarlight_at_gmail.com> wrote:
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> Dear Namd Users!
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> I've already seen similar topic previously but didn't find any
*

*>>>>>>>>>>>> possible solution.
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> How I could use charm gui outputs to generate namd psf file of
*

*>>>>>>>>>>>> the generated membrane ? In my case charm gui generated 6 files
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> http://www.charmm-gui.org/?doc=input/membrane_only&time=1378378701
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> Equilibration Step1: step6.1_equilibration.inp<http://www.charmm-gui.org/uploaded_pdb/1378378701/step6.1_equilibration.inp> Equilibration
*

*>>>>>>>>>>>> Step2: step6.2_equilibration.inp<http://www.charmm-gui.org/uploaded_pdb/1378378701/step6.2_equilibration.inp> Equilibration
*

*>>>>>>>>>>>> Step3: step6.3_equilibration.inp<http://www.charmm-gui.org/uploaded_pdb/1378378701/step6.3_equilibration.inp> Equilibration
*

*>>>>>>>>>>>> Step4: step6.4_equilibration.inp<http://www.charmm-gui.org/uploaded_pdb/1378378701/step6.4_equilibration.inp> Equilibration
*

*>>>>>>>>>>>> Step5: step6.5_equilibration.inp<http://www.charmm-gui.org/uploaded_pdb/1378378701/step6.5_equilibration.inp> Equilibration
*

*>>>>>>>>>>>> Step6: step6.6_equilibration.inp<http://www.charmm-gui.org/uploaded_pdb/1378378701/step6.6_equilibration.inp>
*

*>>>>>>>>>>>> but how I can create psf from that data?
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>> James
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>>
*

*>>>>>>>>>>>
*

*>>>>>>>>>>>
*

*>>>>>>>>>>
*

*>>>>>>>>>>
*

*>>>>>>>>>
*

*>>>>>>>>
*

*>>>>>>>
*

*>>>>>>
*

*>>>>>
*

*>>>>
*

*>>>
*

*>>
*

*>
*

**Next message:**Sunhwan Jo: "Re: charm-gui membrane builder"**Previous message:**Francesco Pietra: "Does stray PME charges with T-REMD mean insufficient resources and can explicit water abandoned for implicit GB?"**In reply to:**James Starlight: "Re: charm-gui membrane builder"**Next in thread:**Sunhwan Jo: "Re: charm-gui membrane builder"**Reply:**Sunhwan Jo: "Re: charm-gui membrane builder"**Messages sorted by:**[ date ] [ thread ] [ subject ] [ author ] [ attachment ]

*
This archive was generated by hypermail 2.1.6
: Tue Dec 31 2013 - 23:23:43 CST
*